🌈Mitsubishi | Rayon Cleansui Water Purification Shower Water-Purify Showerhead SK106W🌈
Recommended by the Japan Atopic Disease Association


The Mitsubishi Rayon Cleansui Dechlorinating Shower Pure Clean SK106W-GR is a dechlorinating shower head that allows one-touch switching between purified water and raw water according to the application.
Since raw water can be used for cleaning the bath, the cartridge lasts longer.
The shower cap is skeletonized so you can check how dirty the filter is.
An oxidation-reduction filter is built into the shower cap at the tip of the head. Residual chlorine can be removed.
The cartridge is made of a material that does not obstruct the flow of water. The cartridge is made of a material that does not obstruct the flow of water, ensuring a sufficient water flow rate (8 liters/minute).
Can be used up to 60°C hot water.
With the included adapter set, it can be easily attached to various types of showers.



💧Water-purifying shower that is gentle to both hair and skin
An oxidation-reduction filter (calcium sulfite) is built into the shower cap at the tip of the head to remove residual chlorine.
The cartridge is made of a material that does not obstruct the flow of water, ensuring sufficient water volume (8L/minute) for showering even when purifying water.
Hot water up to 60°C can be used.
The recommended cartridge replacement period is 2 months, and each cartridge can be used for approximately 4,000 L (approximately 2 months when 60 L is used per day).

*The degree of contamination and cartridge life may vary depending on conditions such as the amount of water used, water quality, water pressure, water temperature, region of use, and residual chlorine concentration.

💧One-touch switching between purified water and raw water
Clean water/condensate switch (push seesaw type)
The cartridge lasts longer because raw water can be used when cleaning the floor, etc. One-touch switching to clean water.
The shower cap is skeleton type, so you can check how dirty the filter is.

💧Easy installation, just replace the shower head
To install, simply remove and replace your existing shower head.
With the included adapter set, it can be easily attached to various types of showers.
(Before purchase) Please check the manufacturer name of the shower head you are currently using, remove it from the hose, and check the thread type of the hose.

Type that can be installed as is
TOTO, INAX, KAKUDAI, SANEI

Type that can be installed using the supplied adapter
MYM W23X14, KVK M22X2, Guster M22X1.5

*If you use a water heater with low water pressure or a storage-type water heater, the water temperature may not be stable and you may not be able to use the water heater.

Due to inventory status and renewals, etc., you may receive a product with a different package than the image.
Thank you for coming
All our products are shipped directly from Japan.
If you have any questions about our products, please contact us.
Thank you very much!